Cartridge Heaters Models
Cartridge Heaters models are one of the resistance types that are widely used in many fields today. Cartridge resistance models, which are the most preferred especially for heating molds and presses, are high quality resistance models.
All of the Cartridge Heaters models are calibrated and produced after the insulation process to be made from the outer pipe sheath with magnesium oxide powder, after being wound with equal intervals around the ceramic stone in the resistance.
Due to the fineness of the magnesium powder between the resistance wire and the pipe sheath, rapid and efficient heat is generated. Due to the fineness of the magnesium powder, which is effective in efficient heat generation, the heat obtained quickly, on the other hand, more heat is obtained with less energy.
Cartridge Heaters Models
Cartridge Heaters models are divided into Elbowed Cartridge Heaters, Connector Cartridge Heater, Special Record Cartridge Heater and Serpentine Cartridge heater. Elbowed cartridge resistances, packaging, plastic etc. They are high efficiency heaters designed for use in industries. Cartridge resistors with connectors are among the resistor types that are frequently used in industrial areas.
Special record cartridge heaters perform the heating process very efficiently and have increased their popularity in industrial areas in recent years. Serpentine cartridge heaters, on the other hand, are a type of resistance that is frequently preferred for heating molds and presses.
The production of Cartridge Resistance models can be carried out with pipe diameters from 4 mm to 31.5 mm. The length can be produced from a minimum of 30 mm up to 5000 mm. Apart from that, it can be produced as L type, elbowed, cubed elbow, Steel Braided Armored, Spiral Armor Protected, unionized, flanged, sleeved as 90 °C bending. Cartridge Resistances are produced by using 80/20 chrome-nickel resistance wire according to the normal values of other resistances, at maximum values, in the same equality and by wrapping them at frequent intervals. Thanks to the magnesium oxide used in the cartridge heaters, an equal heat distribution is provided. Manufacturing is carried out by using standard CR-NI 304 quality (stainless) pipe as outer casing.
Cartridge resistance models are produced using stainless steel materials in many options according to the application area. Apart from these, stainless steel can also be produced. With the latest technology, the production of tubular cartridge type resistances is also easily carried out. Flat tube Cartridge Type Heaters are widely used for heating various liquids and horizontal plates and presses.
Parts of high-wattage cartridge resistance models create a strong heating in environments and molds where heating is required. In this way, it provides the perfect temperature to be obtained, especially in industrial working conditions that require high heat.
Cartridge resistance models can be used in many different sectors such as plastic, rubber processing, chemistry, food, wood. Since these resistors can be produced in different watts, they will meet your expectations. Since these resistances are easy to install, they are the right choices in terms of price and performance. Since it is one of the resistance models that provide high performance, it can be safely integrated into many different systems and industrial areas.
